Cost: $38 single course
Duration: 30 minutes
Description:
Workplace Safety will help you identify safety protocols when working at a repair facility. You will learn work and tool safety, storage regulations, repair facility maintenance and emergency handling protocols, and workplace education requirements.
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $38 single course
Duration: 1 hour
Description:
Working Safely Around Hazardous Materials discusses the ways workers may be exposed to hazardous materials and their effects on the body. You will learn to identify hazardous material exposure situations and hazardous material categories. Learners will receive instruction on how to identify protective clothing, eye protection, hearing protection, and respiratory protection recommended for use around hazardous materials.
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $41 single course
Duration: 1 hour
Description:
Workflow Essentials provides an understanding of supplements and how they affect costs and key performance indicators (KPIs). Students learn how to evaluate the work in process with an introduction to the tools used by a production manager. The course introduces students to the concept of determining what the capacity of their shop is by looking at the big picture first.
After completing this course, you will be able to:
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $38 single course
Duration: 30 minutes
Description:
Vehicle Protection During the Repair Process will help identify steps to promote vehicle safety during the initial inspection. Learn to identify steps for safe vehicle check-in, towing, and moving. Steps to promote production shop safety are provided. Learn to identify production shop safety steps related to teardown, alternate fuel vehicles, parts storage, frame rack, major mechanical, body repairs, welding and heating, and refinishing.
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $38 single course
Duration: 1 hour
Description:
Vehicle Construction Material Types introduces how vehicle makers use a variety of materials to transfer collision energy around the passenger compartment and how to identify the different material types.
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $41 single course
Duration: 1 hour
Description:
Understanding the connection between the profit and loss (P&L) statement and all components within the collision repair process is critical to the success of any business. In this online course a P&L statement is reviewed, and common categories and sub-categories are addressed to help identify areas where profits for a shop may be negatively impacted. Areas of the P&L statement a production manager can have the most influence over are covered as well as strategies to measure and improve performance in those negatively impacted areas. Suggestions for communicating performance results to the team are provided to engage the whole shop in its success.
After completing this course, you will be able to:
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $190 single course
Duration: 3 hours
Description:
Understanding Cycle Time explains what cycle time is and how reducing it can benefit the collision repair facility. This course discusses the basics of measuring cycle time, identifies the waste that hurts cycle time, and lists lean processes and SOPs that can be used to reduce cycle time. The importance of proper upfront damage analysis (i.e. blueprinting) can be used to reduce problems that commonly occur toward the back end of the repair process. Finally, cycle time issues that commonly occur in different departments of the repair facility are examined.
After completing this course, you will be able to:
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf
Cost: $1,095
Duration: 2.5 Days
Description:
The course focuses on issues relevant to commercial auto claims, trucking liability, and cargo losses. Students participate in workshops and case studies to build skills, increase confidence and encourage analytic decision making for commercial risks. Upon successful completion of this course, the student should have the skills necessary to evaluate a file for negotiating, determine the range, evaluate circumstances and other important factors that affect the range, and demonstrate the ability to properly negotiate a claim to conclusion.
Link: https://www.valetrainingsolutions.com/our-courses/transportation-fleet-services/
Cost: $1,695
Duration: 5 Days
Description:
This course includes collision repair, paint, DEF systems and the latest information on hybrid and electric semi trucks. This course begins with an emphasis on tractors, nomenclature, estimating guides, suspensions, cab and body construction, frames, fifth wheels, diesel engines and wear items. The course covers the construction and design of trailers. Also emphasized are frames, sub-frames and panel repairs, mechanical, electrical and refrigeration trailer applications.
Link: https://www.valetrainingsolutions.com/our-courses/tractor-trailer-estimating/
Cost: $146 single course
Duration: 2 hours
Description:
Synchronizing Workflow through Team Communication is designed to show the importance of communication with all customers and departments using a computerized management system. The instructor will demonstrate the tools a production manager will use, as well as how to conduct review and release meetings with the technicians.
After completing this course, you will be able to:
Link: https://www.i-car.com/s/product-detail?productId=a1R1I000001McG4UAK
https://hdrepairforum.com/wp-content/uploads/2020/08/Roles_Curriculum-Flyer_Production-1.pdf